CO2 Incubators

MCO-170AICUVD CO2 Incubator

Effective capacity
165L
Temperature range
+5℃ above ambient to 50℃

Features

Optimising cell culture outcomes and reproducibility

The IncuSafe MCO-170AICUVD CO2 Incubator provides precise control of CO2 concentration and accurate, uniform, and highly responsive temperature control within the chamber. During cell culturing the inCu-saFe germicidal interior and SafeCell UV lamp work continuously to prevent contamination. The incubator’s Dual heat sterilisation utilises the incubator’s two heaters during the 180°C sterilisation process, which takes 11 hours. There is no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted.

Precise & Regulated Environment

InCu-saFe and SafeCell UV both function to prevent contamination. The direct heat system and melamine foam insulation ensure optimal temperature distribution throughout the chamber whilst the Dual IR sensor controls the CO2 level.

Dual Heat Sterilisation

Dual heat sterilisation utilises the incubator’s two heaters during the 180°C sterilisation process, which takes 11 hours. There is no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted. No need to remove inner parts or recalibrate after sterilisation, therefore laboratory processes are more efficient with less incubator downtime.

Simultaneous Use of Stacked Units

The melamine foam insulation limits heat dissipation during dry heat sterilisation. This means that cell culture can continue uninterrupted in incubators stacked with those actively running sterilisation.

Ease of Use & Maintenance

A full colour LCD touch-screen allows full control even with gloved hands. Transfer of data is easy via a USB port. The easy-to-clean incubator interior features fully rounded corners and integrated shelf supports.

Active Background Decontamination

The inCu-saFe copper-enriched stainless steel alloy interior offers the germicidal properties of copper and the durability of stainless steel. The isolated, SafeCell UV lamp (standard on the MCO-170AICUVD model) decontaminates circulating air and water in the humidifying pan, without harming cultured cells.

Benefits

  • Active Background Decontamination
  • PID Control of CO2 and temperature
  • Dual IR CO2 sensor
  • Optimum protection for your cell culturers
  • More space for more cultures
  • Dual heat sterilisation has no effect on temperature inside stacked incubators due to low heat dissipation, cell culturing can continue uninterrupted.

Features

  • DHA Direct heat and Melamine Foam Insulation
  • Dual IR CO2 sensor
  • InCu saFe copper-enriched stainless steel interior
  • SafeCell UV lamp
  • Integrated shelf supports
  • Full colour LCD touch screen
  • USB port

Performance

Performance

Product Photos

Specifications

External Dimensions (W x D x H) 620 x 755 x 905 mm
Internal Dimensions (W x D x H) 490 x 523 x 665 mm
Volume 165 liters
Net Weight 80 kg
Temperature Control Range & Fluctuation AT +5 ~ +50, ±0.1 °C
Temperature Uniformity ±0.25 °C
CO2 Control Range & Fluctuation 0 ~ 20, ±0.15 %
O2 Control Range & Fluctuation -
Humidity Level & Fluctuation 95, ±5 %RH
Sterilisation Method Dry heat sterilisation, 180°C, 11 hours
Temperature Sensor Thermistor
CO2 Sensor Dual IR
O2 Sensor -
Display
Exterior Material Painted Steel (rear cover not painted)
Interior Material Stainless Steel Copper-Enriched Alloy
Insulation Material Melamine resin foam
Heating Method Heater jacket
Outer Doors 1
Outer Door Lock Standard
Field Reversible Door Included
Inner Doors 1
Shelves
Shelf Dimensions (W x D x H) 470 x 450 x 12 mm
Max. Load Per Shelf 7 kg
Max. Shelf Capacity 10
Access Port 1
Access Port Position Rear Upper Left
Access Port Diameter 30
Power Failure R
Out of Temperature Setting V-B-R
High Temperature V-B-R
Out of CO2 Setting V-B-R
Out of O2 Setting -
Door Open V-B
Power Supply Local
Frequency Local
Noise Level 25 dB

Accessories

Options
Safe Cell UV system MCO-170UVSD-PE
Double stacking bracket MCO-170PS-PW
Stacking plate MCO-170SB-PW
CO2 gas pressure regulator MCO-100L-PW
Automatic CO2 cylinder changeover system MCO-21GC-PW
Semi-automatic one point gas calibration kit MCO-SG-PW
InCu saFe shelf MCO-170ST-PW
InCu saFe half tray system MCO-25ST-PW
Roller base MCO-170RB-PW
Optional communication systems
Ethernet interface (LAN) MTR-L03-PW
Digital interface (RS232C/RS485) MTR-480-PW
Analogue interface (4-20mA) MCO-420MA-PW

Dimensions

Catalog Download