Safe and Secure Extra-Large Capacity Ultra-Low Freezer with Dual Cooling System
Secure storage with new dual cooling system
The Dual Cooling System is newly designed to securely store valuable biological samples. It consists of two individual compressors to provide a reliable -86˚C ultra-low temperature environment. Should unexpected failure occur in one cooling circuit, the other will maintain at least -65˚C.
*Any unexpected failure on either of the single compressor will be alerted.
*The data is a measured example (AT23˚C, 230V/ 50Hz, no load.) Actual power consumption will vary depending on set and ambient conditions loading and local voltage.
Intelligent ECO mode operation
“ECO mode” is an industry first feature. The two compressors, A and B, are independently controlled to optimise operation efficiently to minimise energy consumption by monitoring freezer load status.
*Ambient temperature at 30˚C (-80˚C)
*ECO mode’s wave doesn’t settle into pattern. It draws various pattern depends on SV, AT, and usage condition.
*The data is a measured example (AT23˚C, 230V/ 50Hz, no load.) Actual power
consumption will vary depending on set and ambient conditions loading and local voltage.
Graphic control panel
Central LCD display control panel enhances operability and visibility. Data log function retains operation data for a preset period and the data can be directly transmitted to a PC via MTR-480-PW interface.
*A software must be installed on PC to receive the log data transmission.
The microprocessor has a memory back-up so after a power failure, operation resumes at pre-outage settings. The self diagnostics function will display an error code in the case of abnormality
High efficiency insulation using V.I.P. technology
Various alarms including high/low temperatures, door ajar, power failure alarm and part replacement notification help to keep samples safe even in an emergency.
Improved air seal heat resistance structure
To allow the eco mode, and to reduce the frosting, the chamber has a well sealed structure.
Unconventional operation can cause malfunctions. Function control monitor notifies the unconventional operation to prevent the problems and helps the safe operation.
It always monitors the operation, and the flash lamp notifies the drops in the voltage, an abnormality of the temperature rise when the ambient temp is over 35˚C, lower than approximately 0˚C,and overload operation. It also notifies the time of battery replacement, and the door status.
The status of these alarms and indicators will be shown on the control panel.