PHCbi
PHC株式会社 バイオメディカ機器 Communication Interface MTR-MODB1

Interface Board

MTR-MODB1

JP|EN|CN

外観

仕様

Product name interface board
Model number MTR-MODB1-PW
Ethernet port RJ45x1
Standard 10Base-T/100Base-TX
Protocol Modbus*2/TCP
Port number 502(Fixed Modbus)
Outer dimension W74mm x D62.2mm x H58mm
Weight 0.14 kg
Power source DC 5 V (supplied from the connected device)
Display Green LEDx1 (Lit: Normal Operation)
Yellow LEDx1 (Blinking: Ethernet Communication)
Operation button Reset buttonx1
Operation Switch
(for service use only)		 DIP Switch (4-pole)x2
Communication items Refer to the register address map document.
USB Port (for service use only) Type-Cx1
Accessories Screws(4)
Environmental conditions Ambient temperature: -5 ℃ to 65 ℃, humidity: 80% R.H. or less*1
  1. When using this product, install it correctly on one of the PHC equipments included in the "List of Compatible Equipments"
    and use under the environmental conditions recommended for the connected equipment.
  2. Modbus is a registered trademark of Schneider Electric USA Inc.

Supported Equipment

Some equipment listed in the Compatible Equipment List may not be available for sale or service in certain regions.
For communication specifications of each equipment, please refer to the register address map.

機器カテゴリ 機器 DIP SWITCH
Setting No.		 DIP SWITCH
Bit Setting (1–6)		 Installation Requirements
超低温フリーザー MDF-DU503VH/703VH series 29 011101 The interface board must have a serial number 26100043 or later.*3
MDF-DU503VHE/703VHE series 29 011101 The interface board must have a serial number 26100043 or later.*3
MDF-DU503VXH/703VXH series 29 011101 The interface board must have a serial number 26100043 or later.*3
MDF-DU303VXH series 37 100101 The interface board must have a serial number 26030001 or later.*3
Display firmware version must be V.1.03A or later.
MDF-DU302VX/502VX/702VX series 5 000101
MDF-DU502VH/702VH series 6 000110
MDF-DU500ZH/700ZH series 32 100000
MDF-DU500ZHE/700ZHE series 38 100110 The interface board must have a serial number 26100043 or later.*3
MDF-DU901VH series 6 000110
MDF-DU300H 4 000100
MDF-U33V/54V/74V series 1 000001
MDF-DC102VH/202VH series 31 011111
MDF-DC500VX/700VX series 3 000011
MDF-C2156 series 2 000010
バイオメディカルフリーザー MDF-MU339H/539H series 25 011001
MDF-MU549DH 24 011000
MDF-U5412N 0 000000
薬用保冷庫 MPR-S1201XH series 34 100010
MPR-715F 12 001100
MPR-N250FH series 30 011110
MPR-N450FH/N650FH series 13 001101
MPR-S150H/S300H/S500H series 28 011100
MPR-722/1412 series*1 11 001011
MPR-N200H series 28 011100
血液保冷庫 MBR-305G series 14 001110
MBR-705G series 14 001110
MBR-1405G series 14 001110
冷凍機付きインキュベーター MIR-154*2/254*2/554 series 9 001001
MIR-154S/254S series*1 10 001010
グロースチャンバー MLR-352 7 000111
MLR-352H 8 001000
CO2インキュベータ MCO-170AIC/230AIC series 18 010010
MCO-50AIC 26 011010
MCO-170AC 21 010101
MCO-170AICD series 20 010100
MCO-171AICD series 33 100001
MCO-80IC series 17 010001
MCO-5AC series 15 001111
MCO-18AC series 15 001111
MCO-20AIC series 15 001111
MCO-233AIC series 35 100011
MCO-173AIC series 35 100011
MCO-233AICX series 36 100100
MCO-173AICX series 36 100100
マルチガスインキュベーター MCO-50M 27 011011
MCO-170M 19 010011
MCO-5M 16 010000
バイオハザード対策用キャビネット MHE-S1300 series 22 010110
MHE-S901/1301 series 23 010111 Firmware version must be V.1.01 or later.
  1. separately sold battery mounting box (MPR-48B1) is required to install the communication interface product.
  2. separately sold harness (MTR-HRNS) is required to install the communication interface product.
  3. If your interface board does not meet this requirement, an update of the MTR‑MODB1 firmware (FW) is required.
    For details, please contact your service representative.

ダウンロード

その他